Laboratory Equipment

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

Low Priced Units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routing centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator.

Specifictions:

• Capacity: 4 x 15ml
• Type of Head: Swing out.
• No. of Tubes: 4
• Max. speed: 3500 RPM
• Max. RCF: 1750
• W X D X H: 295mm x 295mm x 250mm

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

The popular models of Refrigerated Centrifuges are now available with upgraded technology. Use of brushless induction motor with frequency drive permits user to achieve better speed control and also reduces noise level considerably. These are useful for centrifugation of temperature sensitive material and find application in routine and research work in healthcare, pharmaceuticals, biotechnology, universities and research institutions. Based on application, the user has C-24BL is low volume high speed models in table top design centrifuge.

Special Features:

• Brush-less induction motor with frequency drive
• Precise speed control and reproducibility
• Pre setting of speed, temperature and time
• Speed holding accuracy 100 RPM
• Safety lid interlock to prevent cover opening during centrifugation
• Digital speed indicator, 0-99 minutes digital timer
• Digital temperature indicator-cum-controller
• Better control of sample temperature
• Dynamic brake & imbalance detector with cutoff
• Unique safety rotor identification
• Over current overheating safety cutoff for motor protection

Technical Data:

• Model : C - 24BL
• Maximum Speed : 20000rpm
• Maximum RCF : 37570g
• Maximum Tube Size : 100m
• Maximum Capacity: 400m
• Lowest Temperature : -8°C
• W x D x H : 890mm x 627mm x 575mm
• Connected Load : 1.6kva
• Voltage Stabilizer : 3 kva

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 3,500 / PieceGet Latest Price

Product Details:

A Modestly Priced, Accurate Balance For Colleges And Routine Works

Other Details:

• Capacity : 200 g.
• Sensitivity : 1/10th mg. by addition of 1 mg. deflects pointer by 4 scale divn.
• Beam : Solid beam of special brass alloy. Upper edge notched for 100 divn. with "0" at the Centre.
• Knife Edges & Planes: Selected agate precision grounds.
• Arrestment : Vertical raising up type.
• Pans : Brass Chromium plate.
• Base : Sunmica.
• Case : Seasoned Teak Wood.
• Code Word : KETAN

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 7,700 / PIECEGet Latest Price

Product Details:

Mini Model - for one 8 x 7 cm Gel with casting unit basic unit with platinum electrode assembly (2), Glass Plates - Notched & rectangular (2 sets), Teflon comb, 1, 1.5 mm (2), spacers, 1,1.5 mm (3+3), single gel casting unit (1 set), Metal clips (2), Plastic pouches (1 pkt), clamp & screws (1 set) and power cord (1)

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 18,000 / PieceGet Latest Price

Product Details:

KI2199 B Evaporator is supplied complete with A.C non sparking geared drive unit, support stand fitted on AUTO LIFTING ASSEMBLY(NEW) arrangement for positioning glass assembly, variable DIGITAL RPM , speed regulator, Digitally comtrolled Temperature of Stainless Steel Water Bath, Double Coiled glass condenser with three opening for Vaccum and cooling, Pear shape evaporating flask capacity 800ml. Receiver flask capacity 1 litre with ball boint, feeding tube with vapour path tube, a complete working unit.

Specifications:

• Temp: Ambient to 90°C(Accuracy ±0.5%)
• RPM: 20 to 300(Accuracy±1 RPM)
• Sensors: PT-100
• Display: 12mm RED 7-Segment
• Beater: 1000 watts Stainless Steel.
• Power: 220/230V AC.50Hz

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

The MLH Series magnetic stirrers with hot plate are similar to the ML series of Magnetic stirrers but have additional stainless steel hot lplate. PMDC motor gives higher torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Accurate stepless speed control allows smooth variation upto 1200 rpm. Heating energy is controlled by energy regulator.

Salient Features:

• PMDC motor for higher torque even at low speeds.
• Better low speed stirring enen with samll volume.
• Accurate stepless speed control maintains excellent speed stability.
• Specially designed for corrosive atmosphere reducing the chances of fumes entering the unit.

Specificaitons:

• Capacity: 1MLH
• Heating Capacity: 150 watts.
• W x D x H: 160mm x 200mm x 160mm
• Model: Q - 19
• Stirring Paddle: 9 x 25mm

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 12,500 / PieceGet Latest Price

Product Details:

Provide 50Hz alternating current stimulus for producting minimal and super maximal seizures required in the assay anti-convulsion and epiteptic durgs complete with one pair corneal electrode 4,6 or 8mm cups, and one pair of ear clips work on 220 A.C.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 6,500 / PieceGet Latest Price

Product Details:

Analgesiometer Mark 3 (Eddy"S Hot Plate ) consisting of 30x30 cms. heating surface with perpex enclosure and solid state temperature controller with micro-controller based digital temperature indicator controller to set surface temp. between 30 to 80 degree C

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 6,000 / PieceGet Latest Price

Product Details:

Working principle: It works on thermal destruction using controlled combustion chamber, combustion is controlled & provide enough heat to destroy the waste into disposable state.

Construction: Combustion chamber is well insulated and has high temperature safe dosing and exhaust system. It has long and safe treatment of flew gases for safe disposal through long stack. Additional facilities at an extra cost : Dilution process system.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Product Details:

Consists of two S.S. cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand. Drive is by means of an electric motor & reduction gear box through a centre shaft. The cone is mounted on a plummer blocks for easy movement there by ensuring through mixing. To facilitate easy movement of the cone while charging and discharging of the large units, a special inching arrangement is provided with the unit motor used are single phase or three phase.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 3,500 / PieceGet Latest Price

Product Details:

The cabinet is made of seasoned wood. All internal surface are heavily coated with wax to make these resistant to most of solvents. Hinged lid facilities replinishment of solvent rough.Tight closing with special clamp, rubber gaskets provides air tightening the cabinet has glass windows on all sides. It includes stainless steel trouh and glassrods.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 26,000 / PieceGet Latest Price

Product Details:

Supplied complete with carbon burette 0.5% or 1.5% or 0.25%, absorption vessel, levelling bottle, three way T-shaped stop cock, L-shaped glass tube with stop cock,graduated vessel for sulphur titration, 4ml automatic sulphur titration burette, two litre bottle for NaOH,observation tube, filter trap, oxygen purifying accessories & wooden frame with sunmica base. Combustion tube furnace with thermocouple (using 3 silicon carbide rods) for maximum temperature upto 1450DegC accomodates 22 x 17 x 500mm combustion tube. Control unit for the combustion tube furnace auto transformer type with ammeter, voltmeter and temperature indicator.

The following items are also supplied along with the appratus:-

• One wooden carrying case.
• Two number of combustion tube.
• Ten meter of rubber tubing.
• One meter rod for inserting the combustion boat.
• 50 numbers of combustion boats.
• Conversion chart.
• Instruction manual:(The equipment will be supplied without chemicals)

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Thin lager kit accurately & specially designed to give dependable separation to draw thin uniform layer variable from 0.2mm supplied complete with applicator thin lager drawing board of perspex for plates of special size drying rack made of aluminium to hold plats spotting guides made of transparent perspex sheet developing chamber of rectangular glass with lid stanless steel carrier micropipette of 0.1mm silicagel 25 gm 8 glass plates square size of 200mm uniform thickness and two and plate of 200x50mm

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:

Instruments is used for educational research and quality control industries suitable for testing sugar soluation and other optically adievell quids designed to accomodate upto 200 mm tube having both angular & sugar scale with rotating half shadow effect without lamp assembly & transformer.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 25,000 / PieceGet Latest Price

Product Details:

(Memmert Type Three Sides Heating Elements) The inner chamber is made of anodized Alluminium or Stainless steel as desired. The outer chamber is made of mild steel powder coated. The gap between the two walls is filled with special grade glass wool to avoid loss of heat. The double walled door is fitted with heavy casted hinges with a roller to and fro latch. Adjustable air ventilators at the top sides are provided. The heaters are placed in the ribs on bottom and two sides. The temperature is controlled by a imported bimetal thermostat fom ambient to 250DegC with a sensivity of +/- 1Deg C L-shaped thermometer is provided at the top to indicate the correct temperature. The instrument is complete with 2 pilot lamp & plug in to work on 220/230V AC mains.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 2 Lakh / PieceGet Latest Price

Product Details:

With Automatic Voltage Stabilizer. Housed in a super structure steel frame it is mounted on swivel casters. Complete with perspex see through lid, gasket and control instruments i.e. Microprocessor Based Digital Temperature Controller for measurement of Temp. and electronic vacuum indicator. The unit made out of hermatically sealed compressor and with 100 liters/min direct motor drive rotary vane type vacuum pump of double stage with Air ballast having ultimate vacuum of less than 50 microns in the system and 10 microns on pump head. Condenser Trap: All non-magnetic stainless steel fabricated, argon welded, dished-bottom for complete effluuent removal. Refrigeration coils made of copper bonded to outside of condenser heavily insulated. Temp. upto (-) 40DegC at ambient temperature of 20DegC. is maintained through a Microprocessor Based Digital Temperature Indicator. Vacuum Drum has 6 or 12 port manifold(Main drying chamber) made of stainless steel non-magnetic grade with perspex top cover(CFC freeand puff insulated).

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 1,500 / PieceGet Latest Price

Product Details:

Most regular type made of M.S. having 20x15cm plate form size, 140/330mm Height, maximum load 25 kg, With load plant from of 20cm x 15cm close high 8 cm open hight 22 x 5 cm adjustable at any height.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 8,500 / PieceGet Latest Price

Product Details:

This is very useful for distillation purpose for 500ml cap. flasks. Provided with condenser rack. To work on 220/230V A.C supply without glass parts & clamps.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 5,500 / PieceGet Latest Price

Product Details:

Fully made shock proof with dual wave length range for viewing to short wave length (254nm) and long wave length (365nm) having individual switch to operate the desired wave length working on 230 Volts 50HZ AC supply made of mild steel attractively epoxy painted.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 25,000 / PieceGet Latest Price

Product Details:

Digital Cod Digester (Chemical Oxygen Demand) is suitable for COD method for monitoring wastewater influent and effluent, industrial process water, and more. This instrument is used by Pollution Control Labs. Outer cabinet made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. Aluminium Block is heated to maintain temperature up to 180° C . Solid state digital temperature controller, appropriate heater & insulation selection assure uniformity in all the samples. Selectable timer up to 120 min. with alarm is provided to set the digestion period (Refluxing). After digestion, analyse the sample with either colorimetric or titrimetric method. Aluminium Block with Holes(Dimension 40 mm Dia X 80 mm depth) is used to hold 15 nos. COD tubes.

Specifications:

• Temperature Range : Above amb. To 180°C or higher
• Resolution : 1°C
• Display : Digital 12 mm Red LED
• Control : Digital Electronic Temp. Controller
• Heating Rate : 750 Watts
• Sensor : PT – 100
• Timer : Selectable 15,30,45,60,90 or 120 min with alarm
• Hole Size : 40 mm dia X 80 mm depth
• Glass Tube : 38 mm dia, 15 nos ( 5 X 3 rows)
• Sample Volumes : 20 ml. Each
• Dimension : 500 W X 270 D X 210 mm H
• Optional AT : Glass Tubes 15 nos.
• Extra Cost Air Condenser (600 mm. H)
• Tube Stand
• Condenser Stand

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

Tissue culture hood are most sultable for circulation free environment to eliminate cross contamination in sterile techniques involving culture growth, tissue staining and virus harvestings.The convinient working height of table top and ample working space provides working ease for uses while media praparation,Body is made of thick laminated wooden board and working table top made out of thick stainless steel sheet (SS0-304 grade).The front door is made of thick transparent plexiglass and has arrangement for keeping the door open if desired.All units are fitted with one U.V.germicidal light and one flourescent light for day light vision.The transparent front when closed meshes firmly against lining of a long lasting neoprene rubber.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 3,000 / PieceGet Latest Price

Product Details:

Made of Stainless Steel construction embedding cup with lid and tube thermostatically controlled temparature from Ambient to 70DegC.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Product Price :Get Latest Price

Product Details:

Consists of two stainless steel cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand. Drive is by means of an electric motor & reduction gear box through a centre shaft. The cone is mounted on a plummer blocks for easy movement there by ensuring through mixing. To facilitate easy movement of the cone while charging and discharging of the large units, a special inching arrangement is provided with the unit motor used are single phase or three phase.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Reinforced stainless steel sieves fixed in wooden frame size 9" x 7"

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Remi Specifications:

• Designed for high capacities in laboratories for general purpose stirring applications and is also suitable for polyurethane foam(PUF) stirring. All Models are with 1/8HP AC/DC motor and chuck for quick shaft interchangeability up to 10mm.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Water Still - Basic/PH4 models are designed for reliable continuous operation incorporating a host of features unmatched by comparable stills. It is easy to use, safe to operate, thoroughly reliable and above all low cost.

Features:

• Abundant Output. The still provides, 4 Litres/hr. of distilled water produced through a power input of 3KW by a Chromium Plated heater housed in a horizontal Borosilicate Glass Boiler (Pyrex Brand Borosilicate Glass)
• Distilled output is cool ensured by a high efficiency condenser. Temperature of distillate 25 deg C-40 deg C tested for ambient room temperature of 30 deg C
• Provision for wall mounting
• All units carry CE marking

Distillate Quality:

• Ideal for general Laboratory use - capable of producing Pyrogen free water.

Water Still - Basic/Ph4

• Output : 4 Lit/hr
• Conductivity : (using raw water) : 3.0 - 4.0 us/cm
• Conductivity : (using treated water) : 1.5 - 2.0 us/cm
• PH : 5.5 - 6.0
• Distillate quality : Pyrogen free

Construction:

• The stand is powder coated for long rust free operation.
• Heater is a 3KW chromium plated heater fitted with a thermostat, which shuts off automatically in case of water supply failure.
• The boiler & condenser are deisgned for high efficiency and provided with threading for easy plumbing of condenser.
• Boiler is Provided with Teflon Screw Cock for insitu cleaning of the boiler.
• All plumbing connections to the equipment are made via screw thread connectors.

Specifications:

• Dimensions : (W x D x H)
• PH4 : 50cm x 15cm x 45cm
• Weight : 6 Kg. approx.
• Electricals : 220/240V, 50/60Hz, single phase.
• Power : 3KW Heater.
• Water Supply : Min. flow rate 1 Litre/min
• Min Pressure : 3 p.s.i(0.2 x 105 NM2)

Packaging Information:

• 7 ply carton with PUF packing
• Dimensions : 50cm x 47cm x 46cm
• Gross Weight : 12.00 kgs. approx.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Auto Karl Fischer Titrimeter is an automatic apparatus designed to carry out Carl Fischer Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e. Control Unit & Titration Unit. The Control Unit controls the complete automatic titration. On pressing the Start button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology Titration unit contains the magnetic stirring mechanism and the solenoid valve assembly. The cabinet, is designed to serve as a sturdy titration stand.Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper & textile industries, petroleum refineries, chemical and fertilizer units etc.

Technical Specifications:
Control Unit

• Model : 761
• Display : Array of 10 LED
• Timer : Adjustable Timer
• Buzzer : Yes
• Sample Size : 1-50 mg of Water

K.F.Dispensing

• Resolution : 0.05 ml
• Measuring Electrode : Dual Platinum
• Indications : RUN (Display in Auto Mode) , ADD (Display in Auto Mode), END (Display in Auto Mode)
• Detection : Current sensing by electronic control
• Dimensions : L340 X B250 X H125 mm (Approx.)
• Weight : 2 kg. (Approx.)

Compressor Unit:

• Titration Cell : Air Tight 200ml.
• Stirrer : Variable speed magnetic stirrer with On/Off control
• K.F. Flow : Automatic Sensitive Control Valve for KF Reagent
• Burette : Pressure filling auto zero burette with 0.05ml resolution
• Power : 230V +/-10%, 50Hz, AC
• Dimensions : L325 X B180 X H98 mm (Approx.)
• Weight : 3 kg. (Approx.)

Accessories (free of cost):

• Burette (Clear Glass) 10 m
• Reservoir Bottle 500 ml
• Moisturetrap with rubber bellow for air pumping
• Titration Cell
• Dual Platinum Electrode
• Solenoid Valve Assembly
• Magnetic Capsule
• Set of 2 Clamps
• Rubber Tubing Nozzle
• Instruction Manual

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Jet needle type, consist of 6 S. steel needle jets fixed on a brass (chromium plated) pipe of 12.5 mm diameter with side tap and serrations for fixing rubber with tap water. Springs loaded ampul holding arrangement for various sizes of ampuls. With stainless steel bottle tray on stand.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

For sterile transfer of micro-organisms along with ultra violet tube light.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Used for determination of calorilic valves in oil & coal industries & research labs. Designed in accordance with provisions of the specificatin of petrolium & British standard institutions with best indignous motor & original Beckman thermometer(Hand delivery only).

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Product Price :Get Latest Price

Product Details:

This apparatus is suitable for determining the close cup flash point of petroleum and mixtures according to IP 33 & IP 170 & also 1448 (part I) 1985 (P:20). It is suitable for oils whose flashes below 70DegC. It is supplied with oil cup, cover fitted with stirrer, thermometer socket, water bath & stand. An electric heater fitted at bottom for operation on 220 Volts AC Circuits. Abel Flash point apparatus with oil test jet or Gas test jet device-electri heated with Energy Regulator control.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Product Price :Get Latest Price

Product Details:

Table fixing with hardened grinding discs, provisions for coarse and fine grinding big size.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Product Price :Get Latest Price

Product Details:

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 30,000 / PieceGet Latest Price

Product Details:

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock. 

Approx. Rs 75,000 / PieceGet Latest Price

Product Details:

Other Details:

• Suitable for various industrial, laboratory and R & D applications.
• Forced Air Circulation fan for temperature uniformity.
• Digital PID Control system enables superior temperature accuracy.
• Digital Timer function with buzzer Alarm(OPTION).
• Sturdy Double walled unit inner chamber made of mild steel sheet.
• Drying trays with adjustable height are provided on thesides of inner walls.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Brands:

• Sisco

Flocculator has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water and sewage. In provides identical test conditions for all samples. Illumination base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through flocculator samples. Flocculator consists of heavy duty dc Driven variable speed motor having speed from 20 to 180 RPM with built in speed control. Stainless steel stirring rods are provided with adjustable spacers to adjust the depth of stirring paddles. The stirring shaft can be removed without disturbing other stirrers. This unit is supplied without beakers to wok on 220 volts A.C.

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.

Product Price :Get Latest Price

Product Details:

Note: Image shown in the product is only for illustration purpose product appearance can be changed as per availability of stock.